State Motors & Control Solutions

CALL TOLL FREE TO ORDER NOW
(866) 354-0063

Call Today

Product Finder

PART #
Need Help?
(866) 354-0063
Accept Credit Cards
MasterCard Visa American Express
Trusted Products
View All Manufacturers

Browning Bearings

Call (866) 354-0063 for quick response and pricing

In Stock - Nationwide Warehouses - Same Day Shipping

Browse Our Browning Bearings Catalog


 

Browning Mounted Ball Bearings

Browning Set Screw Lock Mounted Ball Bearings

Features & Benefits

  • Browning® mounted ball bearings with set screw locking are available in a wide variety of features:
    • ½" to 3 15/16"
    • 3 duty Series (100 (light), 200 (normal) and 300 (medium) Series)
    • 9 housing styles
    • 100 Series available in cast iron, ductile iron or stamped steel housings
  • Zone hardened inner race provides a fully hardened ball path while leaving the rest of the inner ring unhardened, allowing better set screw holding power.
  • 120° balanced set screw position provides a balanced three-point contact that minimizes vibration, reduces noise and improves locking reliability.
  • Precision manufactured, diamond faceted set screws.
  • Pillow block housing with a semi-solid, cast iron base provides an excellent mounting foundation and is integral to prevent sheet metal "buckling".
  • Rubber lip contact seal with auxiliary flinger
  • Anti-rotation rivet 
  • Nylon retainer and Grade 10 balls for quieter operation and less vibration.
  • Lubrication groove in housing allowing for consistent grease distribution, factory-filled with Lithium complex NLGI 2 grease.

Browning BOA Concentric Lock Mounted Ball Bearings

Features & Benefits

  • Browning® mounted ball bearings with BOA concentric locking are available in a wide variety of features:
    • 3/4" to 2 7/16"
    • 2 duty Series (200 (normal) and 300 (medium) Series)
    • 5 housing styles
  • Browning BOA concentric collar with a single cap screw provides excellent 360° holding power. Designed to prevent shaft marring or burring and centers the shaft in the bore for less vibration.
  • Zone hardened inner race provides a fully hardened ball path while leaving the rest of the inner ring unhardened, allowing better holding power.
  • Precision manufactured, diamond faceted set screws improve clamping and resist backing out.
  • Pillow block housing with a semi-solid, cast iron base provides an excellent mounting foundation and is integral to prevent sheet metal "buckling".
  • Rubber lip contact seal with auxiliary flinger for proven effective sealing against contaminants.
  • Anti-rotation rivet prevents outer ring creep or rotation within the housing.
  • Nylon retainer and Grade 10 balls for quieter operation and less vibration.
  • Lubrication groove in housing allowing for consistent grease distribution, factory-filled with Lithium complex NLGI 2 grease.

Browning Eccentric Lock Mounted Ball Bearings

Features & Benefits

  • Browning® mounted ball bearings with BOA concentric locking are available in a wide variety of features:
    • ½" to 2 15/16"
    • 2 duty Series (100 (light) and 200 (normal) Series)
    • 12 housing styles
    • 100 Series available in cast iron, ductile iron or stamped steel housings
  • Browning eccentric locking mechanisms consist of an inner ring with an eccentric extension and a mating eccentric collar.
  • Incorporates a precision eccentric locking collar to mate with the inner ring for a reliable shaft hold.
  • Pillow block housing with a semi-solid, cast iron base provides an excellent mounting foundation and is integral to prevent sheet metal "buckling".
  • Anti-rotation rivet prevents outer ring creep or rotation within the housing.
  • Nylon retainer and Grade 10 balls for quieter operation and less vibration.
  • Lubrication groove in housing allowing for consistent grease distribution, factory-filled with Lithium complex NLGI 2 grease

Browning Mounted Ball Air Handling "AH" Bearings

Features & Benefits

  • Browning® mounted ball air handling bearings are specifically designed and manufactured to air handling design specifications and are available in a wide variety of features:
    • ½" to 3 15/16"
    • 3 duty Series (100 (light), 200 (normal) and 300 (medium) Series)
    • 5 housing styles
    • 100 Series available in cast iron, ductile iron or stamped steel housings
  • Special air handling housing fit for easier insert static alignment when mounted on flexible, lightweight frames.
  • Additional noise test is added to ensure bearings meet the noise level requirements of the air handling industry.
  • Browning air handling ball bearings are available with 120° set screw locking or BOA® concentric locking.
  • Incorporates a precision eccentric locking collar to mate with the inner ring for a reliable shaft hold.
  • Pillow block housing with a semi-solid, cast iron base provides an excellent mounting foundation and is integral to prevent sheet metal "buckling".
  • Nylon retainer and Grade 10 balls for quieter operation and less vibration.
  • Lubrication groove in housing allowing for consistent grease distribution, factory-filled with Lithium complex NLGI 2 grease.

Browning Rubber Grommeted Ball Bearings

Features & Benefits

  • Browning® rubber grommeted ball bearings are available in the 100 Series (light duty) from ½" to 1" shaft diameters in a stamped steel pillow block or as an insert unit.
  • The rubber grommet is designed to adjust for misalignment, and dampen noise and vibration.
  • The bearing insert units are designed to fit into HVAC web mount supports.
  • Zone hardened inner race provides a fully hardened ball path while leaving the rest of the inner ring unhardened, allowing better holding power.
  • Rubber lip contact seal with auxiliary flinger for proven effective sealing against contaminants.
  • Nylon retainer and Grade 10 balls for quieter operation and less vibration.
  • Bearings are factory-filled with Lithium complex NLGI 2 grease and cannot be relubed.

Browning Stamped Steel Mounted Ball Bearings

Features & Benefits

  • Browning® stamped steel mounted ball bearings are available in the 100 Series (light duty) from ½" to 1 1/4" shaft diameters in 5 stamped steel housing styles.
  • Stamped steel housings satisfy light-duty HVAC requirements and are well suited for small spaces.
  • Browning stamped steel mount ball bearings are available with 120° set screw locking or eccentric locking.
  • Zone hardened inner race provides a fully hardened ball path while leaving the rest of the inner ring unhardened, allowing better holding power.
  • Rubber lip contact seal with auxiliary flinger for proven effective sealing against contaminants.
  • Nylon retainer and Grade 10 balls for quieter operation and less vibration.
  • Bearings are factory-filled with Lithium complex NLGI 2 grease and cannot be relubed.

Browning VER (ER Style) Ball Bearings

Features & Benefits

  • Browning® VER ball bearings are an economical alternative and are available in the 200 Series (normal duty) from ½" to 3 3/16".
  • The VER critical dimensions are interchangeable with industry standard ER units.
  • The cylindrical outside diameter incorporates a locating snap ring for easy installation and positive location. 
  • 120° balanced set screw position provides a balanced three-point contact that minimizes vibration, reduces noise and improves locking reliability.
  • Precision manufactured, diamond faceted set screws improve clamping and resist backing out.
  • Nylon retainer and Grade 10 balls for quieter operation and less vibration.
  • Grease port in the outer race provides easy relubrication.

Browning CRES CZ (Composite) Mounted Ball Bearings

Features & Benefits

  • Browning® CRES CZ composite mounted ball bearings with zinc coated ball bearing are available in the Browning 200 Series (normal duty) bearing from ¾" to 1 ½" shaft diameter and 4 housing styles.
  • The housing features:
    • High strength reinforced composite housing with reinforced stainless steel ferrules around the bolt slots for increased strength.
    • Solid base construction with low surface porosity. Machined base for smooth, easy to clean surface with minimal gaps and fillings, allowing fewer places for bacteria to grow.
    • Part number is permanently marked on the housing and is not an entrapment point for bacteria.
  • The bearing insert features:
    • Zinc coated outer and inner rings for cost effective, reliable performance.
    • Nylon retainer and Grade 10 balls for quieter operation and less vibration.
    • H1 USDA/FDA compliant food grade grease.

Browning CRES CS Ball Bearings

Features & Benefits

  • Browning® CRES CS composite mounted stainless steel ball bearings are available in the Browning 200 Series (normal duty) bearing from ¾" to 1 ½" shaft diameter and 4 housing styles.
  • The housing features:
    • High strength reinforced composite housing with reinforced stainless steel ferrules around the bolt slots for increased strength.
    • Solid base construction with low surface porosity. Machined base for smooth, easy to clean surface with minimal gaps and fillings, allowing fewer places for bacteria to grow.
  • The bearing insert features:
    • 400 Series stainless steel balls and races for corrosion resistance - no coatings or films.
    • 300 Series stainless steel retainer - a strong, "non-plastic" material.
    • Molded silicone rubber contact seal with 300 Series stainless steel flinger is chemically resistant for wash-down environments.
    • Anti-rotation rivet prevents outer ring creep, or rotation, within the housing.
    • H1 USDA/FDA compliant food grade grease.

Browning CRES SS Mounted Ball Bearings

Features & Benefits

  • The Browning® CRES SS 300 Series stainless steel mounted ball bearings are available in the Browning 200 Series (normal duty) bearing from ¾" to 1 ½" shaft diameter and 4 housing styles.
  • The housing features:
    • Passivated, 300 Series stainless steel investment cast housing for true corrosion resistance.
    • Solid base construction with low surface porosity. Machined base for smooth, easy to clean surface with minimal gaps and fillings, allowing fewer places for bacteria to grow.
  • The bearing insert features:
    • 400 Series stainless steel balls and races for corrosion resistance - no coatings or films.
    • 300 Series stainless steel retainer - a strong, "non-plastic" material.
    • Molded silicone rubber contact seal with 300 Series stainless steel flinger is chemically resistant for wash-down environments.
    • Anti-rotation rivet prevents outer ring creep, or rotation, within the housing.
    • H1 USDA/FDA compliant food grade grease.

Browning Nickel Plated "NK" Mounted Ball Bearings

Features & Benefits

  • Browning® nickel plated mounted ball bearing with zinc coated housing are available in the Browning 200 Series (normal duty) bearing from 5/8" to 1 ½" shaft diameter and 4 housing styles.
  • Zone hardened inner race provides a fully hardened ball path while leaving the rest of the inner ring unhardened, allowing better set screw holding power.
  • 120° balanced set screw position provides a balanced three-point contact that minimizes vibration, reduces noise and improves locking reliability.
  • Nickel plated pillow block housing with a semi-solid, cast iron base provides an excellent mounting foundation and is integral to prevent sheet metal "buckling".
  • Anti-rotation rivet prevents outer ring creep, or rotation within the housing.
  • Nylon retainer and Grade 10 balls for quieter operation and less vibration.
  • Lubrication groove in housing allowing for consistent grease distribution, factory-filled with Lithium complex NLGI 2 grease.

Browning Mounted Roller Bearings

Browning 900/E920 Series Mounted Tapered Roller Bearings

Dimensional Interchange with most Type "E" bearing units.

Features & Benefits

  • Browning® 900 and E920 Series mounted tapered roller bearings are available from 1" to 5" in a two and four bolt pillow blocks, four bolt flanges, flange cartridges and take-up housing styles.
  • All units are completely assembled, adjusted and lubricated at the factory and are ready for use.
  • Heavy duty tapered roller bearings accommodate radial, thrust and combination loads.
  • The 900 Series comes standard with:
    • Ductile iron housings providing high strength and load support in a wide variety of applications.
    • Eccentric locking collar mates with the inner race for shaft lock.
    • CENTRAP® labyrinth seals contains an angled flinger that rotates with the shaft, creating a centrifugal force to help keep out contamination.
  • The E920 Series comes standard with:
    • Two sets of (double) set screw locking collars to maintain shaft lock.

Browning 950 / 970 Series Mounted Tapered Roller Bearing

950 are a dimensional interchange with most Type "K" bearing units.

970 are a dimensional interchange with most Type "DI" bearing units.

Features & Benefits

  • Browning® 950 and 970 Series mounted tapered roller bearings are available from 1 3/8" to 5" in a two and four bolt pillow blocks, four bolt flanges housing and as replacement inserts.
  • Durable ductile iron 2 bolt split pillow block housings for quick insert replacement and fast mounting.
    • Quick insert replacement when change-out is needed
    • Housing base remains fixed and aligned with the shaft - reducing downtime and maintenance costs
  • Heavy duty tapered roller bearings accommodate radial, thrust and combination loads.
  • The 950 Series comes standard with:
    • Eccentric locking collar mates with the inner race for shaft lock.
    • CENTRAP® labyrinth seals contain an angled flinger that rotates with the shaft, creating a centrifugal force to help keep out contamination.
  • The 970 Series comes standard with:
    • Two sets of (double) set screw locking collars to maintain shaft lock.
  • Expansion roller bearing pillow blocks are available for use when expansion is required, such as when significant temperature differentials are expected between shafts and mount structures or the shaft is unusually long.

950 are a dimensional interchange with most Type "K" bearing units.

970 are a dimensional interchange with most Type "DI" bearing units.

Browning 1000/1100 Series Mounted Spherical Roller Bearing

1000 and 1100 Series are a dimensional interchange with most competitive, spherical roller bearing setscrew mounting dimensions.

Features & Benefits

  • Browning® 1000 and 1100 Series mounted spherical roller bearings are available from:
    • 1 1/8" to 4" two and four bolt pillow blocks, three and four bolt flanges, flange cartridges and take-up styles.
    • Up to 4 15/16" in four bolt, pillow block design.
    • 1 7/16", 1 15/16" and 2 15/16" in a flange bracket design for tight mounting requirements and space saving design.
  • Compact solid one piece cast iron (1000 Series) and ductile iron (1100 Series) housing provide strength and load support in a wide variety of applications.
  • Double row, spherical roller bearings are designed to accommodate increased rotational speeds and +/- 1 ½° dynamic alignment capability.
  • Browning MULTI-TRAP® seals offer additional protection against contaminant entry and provide grease retention up to 4". Contact seals are also available by adding "C" at the end of the part description and are standard above 4".
  • Concentric locking collar with two set screws anchor the bearing to the inner race.
  • Expansion roller bearing pillow blocks are available for use when expansion is required, such as when significant temperature differentials are expected between shafts and mount structures or the shaft is unusually long.

Browning 22200/22500 Series Split Housing Spherical Roller Bearing

Browning spherical roller bearings are a dimensional interchange with most competitive SAF pillow block housings

Features & Benefits

  • Browning 22200 and 22500 Series split housing spherical roller bearings are available in two bolt pillow blocks in bore sizes from 2 7/16" - 9 9/16" and four bolt pillow blocks from 2 7/16" - 9 9/16".
  • Housings are available in cast iron and cast steel housings for ease in bearing replacement and to meet various application demands.
  • The housing assembly utilizes a double row spherical roller bearings designed to accommodate increased rotational speeds and +/- 1 ½° dynamic alignment capability.
  • Available with industry standard, triple labyrinth seals.
  • Browning 22500 Series utilizes a tapered adapter sleeve system to fasten the bearing to the shaft.
  • Browning 22200 Series cylindrical bore units require a press on the shaft.